Vibration-measurement Equipment

VT1002D

 

The VIBtransmitter VT1002D is an upgraded version of the VT1000 module with 2 relay outputs, which can work independently performing the warning and alarm functions. The device has a built-in display showing current measured vibration signal value. The configuration is made with 3 buttons and DIP switches. The 4..20mA current output for signal estimate (RMS, PEAK) makes it possible to directly connect the VT1002D into the monitored machine control system. The device in very compact and DIN rail mountable, which simplifies the integration with PLC system inside of typical control cabinets.

  • Sensor type: ICP® 100mV/g
  • Measured values: velocity or acceleration
  • Calculated estimates: RMS or 0-PEAK
  • Default masurement range: 0-100 mm/s or m/s2
  • Power supply: 24 VDC
  • Power consumption: < 4 W
  • Low pass filter: 1 or 10 kHz, 24 dB/oct
  • High pass filter: 3 lub 10 Hz, 12 dB/oct
  • Insulation: 1.0 kV
  • Current output: 4…20mA
  • Voltage output: AC, 10Vpp max
  • Warning relay: 100mA/24V
  • Alarm relay: 100mA/24V
  • Operational temperature: -20 to 60 °C
  • Humidity: < 95% RH
  • IP Code: IP40
  • Dimensions: 23 mm x 100 mm x 120 mm (w x h x l)
  • Mounting: 35mm DIN rail

Designed and manufactured by:

logo-ec

-20
+60

Working temperature °С:

-40
+60

Storage temperature °С:

95
max

Relative humidity %: